82443GX Datasheet, PDF (78/128 Pages) Intel Corporation – Intel 440GX AGPset: 82443GX Host Bridge/Controller

Register Description
3.4.17
MBASE—Memory Base Address Register (Device 1)
Address Offset:
Default Value:
Access:
Size:
20–21h
FFF0h
Read/Write
16 bits
This register controls the CPU to AGP non-prefetchable memory access routing based on the
following formula:
MEMORY_BASE=< address =<MEMORY_LIMIT
This register must be initialized by the configuration software.
Bit
15: 4
3:0
Description
Memory Address Base (MEM_BASE). Corresponds to A[31:20] of the memory address.
Default=FFF0h
Reserved.
3.4.18
MLIMIT—Memory Limit Address Register (Device 1)
Address Offset:
Default Value:
Access:
Size:
22–23h
0000h
Read/Write
16 bits
This register controls the CPU to AGP non-prefetchable memory access routing based on the
following formula:
MEMORY_BASE=< address =<MEMORY_LIMIT
This register must be initialized by the configuration software.
Note:
Memory range covered by MBASE and MLIMIT registers are used to map non-prefetchable AGP
address ranges (typically where control/status memory-mapped I/O data structures of the graphics
controller will reside) and PMBASE and PMLIMIT are used to map prefetchable address ranges
(typically graphics local memory). This segregation allows application of USWC space attribute to
be performed in a true plug-and-play manner to the prefetchable address range for improved CPU-
AGP memory access performance.
Note:
The configuration software is responsible for programming all address range registers
(prefetchable, non-prefetchable) with the values that provide exclusive address ranges i.e. prevent
overlap with each other and/or with the ranges covered with the main memory. There is no
provision in the 82443GX hardware to enforce prevention of overlap and operations of the system
in the case of overlap are not guaranteed.
Bit
15: 4
3:0
Description
Memory Address Limit (MEM_LIMIT). Corresponds to A[31:20] of the memory address. Default=0
Reserved.
3-54
82443GX Host Bridge Datasheet