MC68HC908JB8 Datasheet, PDF (116/286 Pages) Motorola, Inc – MICROCONTROLLERS

System Integration Module (SIM)
8.8.3 Break Flag Control Register
The break control register contains a bit that enables software to clear
status bits while the MCU is in a break state.
Address: $FE03
Bit 7
6
5
4
3
2
1
Bit 0
Read:
BCFE
R
R
R
R
R
R
R
Write:
POR: 0
R = Reserved
Figure 8-20. Break Flag Control Register (BFCR)
BCFE — Break Clear Flag Enable Bit
This read/write bit enables software to clear status bits by accessing
status registers while the MCU is in a break state. To clear status bits
during the break state, the BCFE bit must be set.
1 = Status bits clearable during break
0 = Status bits not clearable during break
Technical Data
116
MC68HC908JB8•MC68HC08JB8•MC68HC08JT8 — Rev. 2.3
System Integration Module (SIM)
Freescale Semiconductor