XRT72L52 Datasheet, PDF (106/480 Pages) Exar Corporation – TWO CHANNEL DS3/E3 FRAMER IC WITH HDLC CONTROLLER

XRT72L52 TWO CHANNEL DS3/E3 FRAMER IC WITH HDLC CONTROLLER
REV. P1.1.3
2.4.3.21 Receive E3 TTB-10 Register (E3, ITU-T
G.832)
RXE3 TTB-10 REGISTER (ADDRESS = 0X26)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
RxTTB-10
RO
RO
RO
RO
RO
0
0
0
0
0
BIT 2
RO
0
áç
PRELIMINARY
BIT 1
RO
0
BIT 0
RO
0
This Read-Only register contains the eleventh (11th)
byte within the 16 byte Trail Trace Buffer Message,
that has been received from the Remote Terminal.
This register typical contains an ASCII character that
is required for the E.164 numbering format.
NOTE: For more information on the use of this register,
please see Section 5.3.2.9.
2.4.3.22 Receive E3 TTB-11 Register (E3, ITU-T
G.832)
RXE3 TTB-11 REGISTER (ADDRESS = 0X27)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
RxTTB-11
RO
RO
RO
RO
RO
RO
RO
RO
0
0
0
0
0
0
0
0
This Read-Only register contains the twelfth (12th)
byte within the 16 byte Trail Trace Buffer Message,
that has been received from the Remote Terminal.
This register typical contains an ASCII character that
is required for the E.164 numbering format.
NOTE: For more information on the use of this register,
please see Section 5.3.2.9.
2.4.3.23 Receive E3 TTB-12 Register (E3, ITU-T
G.832)
RXE3 TTB-12 REGISTER (ADDRESS = 0X28)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
RxTTB-12
RO
RO
RO
RO
RO
RO
RO
RO
0
0
0
0
0
0
0
0
This Read-Only register contains the thirteenth (13th)
byte within the 16 byte Trail Trace Buffer Message,
that has been received from the Remote Terminal.
This register typical contains an ASCII character that
is required for the E.164 numbering format.
NOTE: For more information on the use of this register,
please see Section 5.3.2.9.
2.4.3.24 Receive E3 TTB-13 Register (E3, ITU-T
G.832)
RXE3 TTB-13 REGISTER (ADDRESS = 0X29
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
RxTTB-13
RO
RO
RO
RO
RO
RO
RO
RO
0
0
0
0
0
0
0
0
87