EP2C8T144I8N Datasheet, PDF (84/470 Pages) Altera Corporation – Cyclone II Device Handbook, Volume 1

I/O Structure & Features
Figure 2–28. EP2C5 & EP2C8 I/O Banks Notes (1), (2)
I/O Bank 2 Also Supports
the SSTL-18 Class II,
HSTL-18 Class II, & HSTL-15
Class II I/O Standards
I/O Bank 2
I/O Bank 1
Also Supports the
3.3-V PCI & PCI-X
I/O Standards
I/O Bank 1
All I/O Banks Support
■ 3.3-V LVTTL/LVCMOS
■ 2.5-V LVTTL/LVCMOS
■ 1.8-V LVTTL/LVCMOS
■ 1.5-V LVCMOS
■ LVDS
■ RSDS
■ mini-LVDS
■ LVPECL (3)
■ SSTL-2 Class I and II
■ SSTL-18 Class I
■ HSTL-18 Class I
■ HSTL-15 Class I
■ Differential SSTL-2 (4)
■ Differential SSTL-18 (4)
■ Differential HSTL-18 (5)
■ Differential HSTL-15 (5)
Individual
Power Bus
I/O Bank 3
Also Supports the
3.3-V PCI & PCI-X
I/O Standards
I/O Bank 3
I/O Bank 4
I/O Bank 4 Also Supports
the SSTL-18 Class II,
HSTL-18 Class II, & HSTL-15
Class II I/O Standards
Notes to Figure 2–28:
(1) This is a top view of the silicon die.
(2) This is a graphic representation only. Refer to the pin list and the Quartus II software for exact pin locations.
(3) The LVPECL I/O standard is only supported on clock input pins. This I/O standard is not supported on output
pins.
(4) The differential SSTL-18 and SSTL-2 I/O standards are only supported on clock input pins and PLL output clock
pins.
(5) The differential 1.8-V and 1.5-V HSTL I/O standards are only supported on clock input pins and PLL output clock
pins.
2–58
Cyclone II Device Handbook, Volume 1
Altera Corporation
February 2007