|
EP2C5T144I8N Datasheet, PDF (191/470 Pages) Altera Corporation – Cyclone II Device Handbook, Volume 1 | |||
|
◁ |
Software
Overview
PLLs in Cyclone II Devices
You can use the altpll megafunction in the Quartus II software to
enable Cyclone II PLLs. Figure 7â3 shows the available ports in
Cyclone II PLLs and their sources and destinations. The c0 and c1
counters feed the internal global clock networks and the c2 counter can
feed the global clock network and a dedicated external clock output pin
(PLL<#>_OUT) at the same time.
Figure 7â3. Cyclone II PLL Signals
(1)
inclk[1..0] (2)
c[1..0]
pllena
(3) c2
areset
locked
pfdena
clkswitch
Physical Pins
Signal driven by internal logic
Signal driven to internal logic
Internal clock signal
Physical pins and internal clock signal
Notes to Figure 7â3:
(1) These signals can be assigned to either a single-ended or differential I/O standard.
(2) The inclk must be driven by one of two dedicated clock input pins.
(3) This counter output can drive both a dedicated external clock output
(PLL<#>_OUT) and the global clock network.
Altera Corporation
February 2007
7â7
Cyclone II Device Handbook, Volume 1
|
▷ |