XC4VLX100-11FF1148C Datasheet, PDF (2/58 Pages) Xilinx, Inc – DC and Switching Characteristics

Virtex-4 FPGA Data Sheet: DC and Switching Characteristics
Table 1: Absolute Maximum Ratings (Continued)
Symbol
Description
Units
Voltage applied to 3-state 3.3V output
(all user and dedicated I/Os)
–0.75 to 4.05
V
V_TS
Voltage applied to 3-state 3.3V output
(restricted to maximum of 100 user I/Os)^(3,4)
–0.95 to 4.4
(Commercial Temperature)
–0.85 to 4.3
V
(Industrial Temperature)
2.5V or below I/O input voltage relative to GND
(user and dedicated I/Os)
–0.75 to V_CCO +0.5
V
AVCCAUXRX
Receive auxiliary supply voltage relative to analog ground, GNDA
(RocketIO pins)
–0.5 to 1.32
V
AVCCAUXTX
Transmit auxiliary supply voltage relative to analog ground, GNDA
(RocketIO pins)
–0.5 to 1.32
V
AVCCAUXMGT
Management auxiliary supply voltage relative to analog ground, GNDA
(RocketIO pins)
–0.5 to 3.0
V
V_TRX
Terminal receive supply voltage relative to GND
–0.5 to 3.0
V
V_TTX
Terminal transmit supply voltage relative to GND
–0.5 to 1.65
V
T_STG
T_SOL
T_J
Storage temperature (ambient)
Maximum soldering temperature⁽²⁾
Maximum junction temperature⁽²⁾
–65 to 150
°C
+220
°C
+125
°C
Notes:
1. Stresses beyond those listed under Absolute Maximum Ratings might cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those listed under Operating Conditions is not implied. Exposure to
Absolute Maximum Ratings conditions for extended periods of time might affect device reliability.
2. For soldering guidelines and thermal considerations, see the Virtex-4 Packaging and Pinout Specification on the Xilinx website.
3. When using more than 100 3.3V I/Os, refer to the Virtex-4 FPGA User Guide, Chapter 6, “3.3V I/O Design Guidelines.”
4. For more flexibility in specific designs, a maximum of 100 user I/Os can be stressed beyond the normal spec for no more than 20% of a data period.
There are no bank restrictions.
Table 2: Recommended Operating Conditions
Symbol
Description
Min
Max Units
Internal supply voltage relative to GND, T_J = 0° C to +85° C
Commercial
1.14
V_CCINT
Internal supply voltage relative to GND, T_J = –40° C to +100° C Industrial
1.14
1.26
V
1.26
V
V_CCAUX
Auxiliary supply voltage relative to GND, T_J = 0° C to +85° C Commercial
Auxiliary supply voltage relative to GND, T_J = –40° C to +100° C Industrial
2.375
2.375
2.625
V
2.625
V
V_CCO(1, ^{3, 4, 5)}
Supply voltage relative to GND, T_J = 0° C to +85° C
Supply voltage relative to GND, T_J = –40° C to +100° C
Commercial
1.14
Industrial
1.14
3.45
V
3.45
V
3.3V supply voltage relative to GND, T_J = 0° C to +85° C
Commercial GND – 0.20
3.45
V
3.3V supply voltage relative to GND, T_J = –40° C to +100° C
Industrial GND – 0.20
3.45
V
V_IN
2.5V and below supply voltage relative to GND,
T_J = 0° C to +85° C
Commercial GND – 0.20 V_CCO + 0.2 V
2.5V and below supply voltage relative to GND,
T_J = –40° C to +100° C
Industrial GND – 0.20 V_CCO + 0.2 V
I_IN
Maximum current through any pin in a powered or unpowered ^Commercial
bank when forward biasing the clamp diode.
Industrial
10
mA
10
mA
V_BATT(2)
Battery voltage relative to GND, T_J = 0° C to +85° C
Battery voltage relative to GND, T_J = –40° C to +100° C
Commercial
1.0
Industrial
1.0
3.6
V
3.6
V
DS302 (v3.7) September 9, 2009
www.xilinx.com
Product Specification
2