TLK100_11 Datasheet, PDF (43/88 Pages) Texas Instruments – Industrial Temp, Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver

TLK100
www.ti.com
SLLS931B – AUGUST 2009 – REVISED DECEMBER 2009
8.1 Register Definition
In the register definitions under the ‘Default’ heading, the following definitions hold true:
• RW = Read Write access
• SC = Register sets on event occurrence and Self-Clears when event ends
• RW/SC = Read Write Access/Self Clearing bit
• RO = Read Only access
• COR = Clear on Read
• RO/COR = Read Only, Clear on Read
• RO/P = Read Only, Permanently set to a default value
• LL = Latched Low and held until read, based upon the occurrence of the corresponding event
• LH = Latched High and held until read, based upon the occurrence of the corresponding event
Copyright © 2009, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TLK100
Register Block
43