R0E417250MCU00 Datasheet, PDF (85/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
5. Debugging Functions
5.1.4 Setting up the Memory Map
The Memory map page of the Configuration properties dialog box allows the user to assign emulation memory to the internal
ROM or external space.
You can allocate two areas in the internal ROM (in 128-Kbyte units) and four areas in external space (in 1-Mbyte units).
Figure 5.3 Configuration properties dialog box (Memory map page)
(1) Assign emulation memory to internal flash ROM
Up to two blocks can be allocated as emulation memory. Select the checkboxes for the areas you wish to use and specify the
addresses where the blocks start and end. Note, however, that the 16 lower-order bits of the addresses are fixed because the
blocks are only specifiable in 128-Kbyte units.
By default, up to two areas of emulation memory will be allocated from the first address of the internal ROM.
When emulation memory is released from allocation as internal ROM, the current data in the emulation memory will be
written to the internal ROM.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 85 of 228