|
R0E417250MCU00 Datasheet, PDF (205/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series | |||
|
◁ |
R0E417250MCU00 Userâs Manual
5. Debugging Functions
(2) âOutput settingâ
âOutput settingâ indicates the levels of signals to be output through trigger pins 31 to 24. Clicking on one of these buttons
changes the state of the corresponding pin in the following order.
L: Low
H: High
â: The previous setting is retained.
When the Trigger Output Conditions dialog box is opened, the states of all signals in the âOutput settingâ section are always
indicated as âââ, whether the previous setting was L or H.
(3) Starting output of signals
Click on the âOutputâ button to validate the settings and start output of signals.
(4) Saving output patterns
You can save the settings on trigger pins 31 to 24 and reflect a saved setting as the âOutput settingâ. This simplifies operations.
After making settings for an âOutput settingâ, click on the âAdd patternâ button. The new setting will be added as the last line
in the âOutput patternâ list.
Up to 256 patterns can be added.
Double-clicking on a line in the âOutput patternâ list reflects the information on the line as the âOutput settingâ.
The order of the lines (patterns) can be changed by dragging and dropping.
To delete a pattern, select the line and click on the âDeleteâ button.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 205 of 228
|
▷ |