R0E417250MCU00 Datasheet, PDF (68/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
4. Preparation for Debugging
The other list boxes are used for setting up a toolchain. If no toolchains are installed, fixed information is displayed here. Click
on the OK button.
(3) Select the target for debugging.
Figure 4.4 Setting the Target System for Debugging dialog box
Select the target platform you wish to use by placing a check mark in its checkbox and click on the Next button.
(4) Set a configuration name. Configuration refers to a file in which information on the state of the High-performance
Embedded Workshop for use with target software rather than emulators is saved.
Figure 4.5 Setting the Debugger Options dialog box
If you have selected two or more target platforms, click on the Next button and then set a configuration name for each of the
selected target platforms.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 68 of 228