|
R0E417250MCU00 Datasheet, PDF (211/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series | |||
|
◁ |
R0E417250MCU00 Userâs Manual
6. Troubleshooting (Action in Case of an Error)
6. Troubleshooting (Action in Case of an Error)
6.1 Flowchart for Remediation of Trouble
Figure 6.1 shows the flowchart for remediation of trouble arising between activation of the power supply to the emulator
system and the emulator debugger starting up. Go through the checks with the user system disconnected. For the latest FAQs,
visit the Renesas Tools Homepage.
http://www.renesas.com/tools
Turn on the power to the emulator
Check the LEDs on the emulator
Not normal
Normal
1. Check the connection of power cable.
See â2.5 Connecting the Emulator Power Supplyâ
View the Device setting
dialog box of the
emulator debugger
Normal
Not normal/Error displayed
1. Check the operating environment of the emulator debugger.
See â5.1 Setting Up the Emulation Environmentâ
2. Re-install the emulator debugger.
View the Configuration
properties dialog box of the
emulator debugger
Normal
Not normal/Error displayed
See â6.3.(2) On the system page of the Configuration properties
dialog box does not appear in booting-up of the emulator
debuggerâ
View the Connecting
dialog box of the
emulator debugger
Normal
Not normal/Error displayed
See â6.3.(3) Error occurs in the Connecting dialog boxâ
View the Editor window of the
emulator debugger
Normal
Error displayed
See â6.3.(4) Errors occur in booting-up of the emulator debuggerâ
The emulator debugger has started up
Figure 6.1 Flowchart for remediation of trouble
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 211 of 228
|
▷ |