R0E417250MCU00 Datasheet, PDF (15/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
Terminology
Terminology
Some specific words used in this user's manual are defined below.
MCU unit (R0E417250MCU00)
This means the E100 emulator for the H8SX/1700 Series.
Emulator system
This means an emulator system built around the MCU unit (R0E417250MCU00). The emulator system is configured with an
emulator main unit (R0E001000EMU00), MCU unit (R0E417250MCU00), emulator power supply, USB cable, emulator
debugger and host machine.
Integrated development environment: High-performance Embedded Workshop
The High-performance Embedded Workshop (HEW) provides a GUI-based integrated development environment for the
development and debugging of embedded applications for Renesas microcontrollers.
HEW, a powerful yet easy to use tool suite, features an industry standard user interface and is designed using a modular
approach seamlessly incorporating device family-specific C/C++ compilers and the debugger elements for various debugging
platforms including emulators and evaluation boards.
This provides the user with a single interface to fully exploit the advanced capabilities of the development tools for the entire
development cycle from evaluation of a device through to completion of code development.
Emulator debugger
This means a software tool that is started up from the High-performance Embedded Workshop, and controls the MCU unit and
enables debugging.
Firmware
This means a control program stored in the emulator. This analyzes the contents of communications with the emulator
debugger and controls the emulator hardware. To upgrade the firmware, download the program from the emulator debugger.
Host machine
This means a personal computer used to control the emulator.
Target MCU
This means the MCU to be debugged.
User system
This means a user's application system in which the MCU to be debugged is used.
User program
This means the program to be debugged.
Evaluation MCU
This means the MCU mounted on the emulator which is operated in a dedicated mode for use with tools.
#
This symbol indicates that a signal is active-low (e.g. RESET#).
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 15 of 228