R0E417250MCU00 Datasheet, PDF (59/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
3. Tutorial
(3) Next, set the trace point, i.e. the point where the debugger will start acquiring trace information. Open the OR page of the
Trace conditions dialog box. Select the main function in the Editor window and drag-and-drop it onto the OR page. Click
on the Apply button and then the Close button.
Thus, the debugger will start acquiring trace information when the main function is executed.
Figure 3.35 Trace conditions dialog box (OR page)
(4) Choose Reset Go from the Debug menu. As soon as the trace point is reached, trace information as shown below will start
to be displayed in the Trace window.
Figure 3.36 Trace window (Fill around TP)
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 59 of 228