R0E417250MCU00 Datasheet, PDF (67/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
4. Preparation for Debugging
4.2 Creating a New Workspace (Toolchain Unused)
The procedure for creating a new project workspace differs according to whether you are using a toolchain or not.
Toolchains are not included with the E100 emulator. Toolchains can be used in environment in which the C/C++ compiler
package is installed.
Follow the procedure below to create a new workspace.
(1) In the Welcome! dialog box, select the radio button with the caption “Create a new project workspace” and click on the OK
button.
Figure 4.2 Welcome! dialog box
(2) The Project Generator will start.
Figure 4.3 New Project Workspace dialog box
Workspace Name:
Project Name:
Directory:
CPU family:
Enter a workspace name here.
Enter a project name here. You do not need to enter any name if you wish this to be the
same as the workspace name.
Enter the directory in which you want the workspace to be created. Alternatively, click on
the Browse button and select a workspace directory from the dialog box.
Select the CPU family of the MCU you are using.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 67 of 228