R0E417250MCU00 Datasheet, PDF (179/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
5. Debugging Functions
5.13.4 Setting Ranges for Function Profile Measurement
Choose Set Range from the popup menu that is displayed when you right-click in the window.
The Realtime Profile Setting dialog box will be displayed. Set a profile measurement range in this dialog box.
[Function profile mode]
Figure 5.101 Realtime Profile Setting dialog box
(1) Memory allocation
Before function profiles can be measured, profile memory must be allocated to the addresses at which measurement will be
performed. Profile data can only be obtained from address ranges to which memory has been allocated.
You can specify any number of blocks 1 to 8 (for a total of up to 1 Mbyte), each beginning on a 128-Kbyte boundary, as areas
for profile measurement.
The blocks may be contiguous or non-contiguous.
With the initial settings, the profile memory is automatically allocated to addresses in the ROM and RAM areas.
(2) Automatic detection of functions
When profile memory is assigned to an address range, the E100 emulator automatically detects functions within that range and
adds them to the window.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 179 of 228