R0E417250MCU00 Datasheet, PDF (27/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
2. Setup
2.5 Connecting the Emulator Power Supply
Power is supplied from the included AC adapter to the emulator. The following shows how to connect the AC adapter.
(1) Turn OFF the power of the emulator.
(2) Connect the DC cable of the AC adapter to the emulator.
(3) Connect the AC power cable to the AC adapter.
(4) Connect the AC power cable to the outlet.
Figure 2.5 Connecting the emulator power supply
CAUTION
Cautions for AC Adapter:
z Use only the AC adapter included in the E100 package.
z The included AC adapter is exclusively for the E100 emulator main unit. Do not use it for other products.
z Before installing this product or connecting it to other equipments, disconnect the AC power cable from the
outlet to prevent injury or accident.
z The DC plug of the included AC adapter has the polarity shown below.
z The included AC adapter has no power switch. The AC adapter is always active while connected to the AC
power cable.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 27 of 228