R0E417250MCU00 Datasheet, PDF (8/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
Precautions for safety
CAUTION
Cautions to Be Taken for Turning On the Power:
z Turn ON/OFF the power of the emulator and user system as simultaneously as possible.
z When turning on the power again after shutting off the power, wait about 10 seconds.
Cautions to Be Taken for Handling This Product:
z Use caution when handling the main unit. Be careful not to apply a mechanical shock.
z Do not touch the connector pins of the emulator main unit and the target MCU connector pins directly. Static
electricity may damage the internal circuits.
z Do not pull this emulator by the communications interface cable or the flexible cable. And, excessive flexing or
force may break conductors.
z Do not flex the flexible cable excessively. The cable may cause a break.
z Do not use inch-size screws for this equipment. The screws used in this equipment are all ISO (meter-size) type
screws. When replacing screws, use same type screws as equipped before.
Caution to Be Taken for System Malfunctions:
z If the emulator malfunctions because of interference like external noise, shut OFF the emulator once and then
reactivate it.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 8 of 228