R0E417250MCU00 Datasheet, PDF (212/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
6. Troubleshooting (Action in Case of an Error)
6.2 Error in Self-checking
When an error occurs in the self-checking, check the following items.
(1) Re-check the connection between the E100 emulator main unit and the MCU unit.
(2) Download the proper firmware again.
(3) Check the error log from self-checking by the debugger software, and refer to the instructions given therein (see Figure
6.2).
“Error occurred during the self-check test.”
dialog is displayed.
Click on the OK button.
Check the log in the self-check dialog box.
Refer to any instructions in the log.
Figure 6.2 Flowchart for checking of an error in self-checking
IMPORTANT
Notes on Self-checking:
z Disconnect the MCU unit from a converter board and the user system before you start self-checking.
z If the results of self-checking are not normal (excluding status errors of the target system), the product may
have been damaged. Contact your local distributor.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 212 of 228