R0E417250MCU00 Datasheet, PDF (126/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
5. Debugging Functions
Figure 5.46 Trace conditions dialog box
(2) ^{Setting trace points}
If you have selected Fill around TP, Repeat fill until stop or Repeat fill until full, you need to set a trace point.
For trace points, you can specify conditions using events and/or the detection of specific exceptional events.
For Fill around TP, you can also specify a delay value.
(3) Selecting Capture or Do not capture
If the selected trace mode is Fill until stop, Fill until full or Fill around TP, you can specify Capture or Do not capture in the
Record condition group box.
Figure 5.47 Record condition group box
You can specify events so as to extract only the required portions or to eliminate non-required portions of the trace information.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 126 of 228