R0E417250MCU00 Datasheet, PDF (72/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
4. Preparation for Debugging
4.4 Opening an Existing Workspace
Follow the procedure below to open an existing workspace.
(1) In the Welcome! dialog box, select the radio button with the caption “Browse to another project workspace” and click on
the OK button.
Figure 4.10 Welcome! dialog box
(2) The Open Workspace dialog box shown below will appear.
Figure 4.11 Open Workspace dialog box
Specify the directory in which the workspaces was created, select the workspace file (extension “.hws”), and click on the
Select button.
(3) The High-performance Embedded Workshop will start, and its state will be restored to the state at the time the selected
workspace was saved. If the emulator was connected at the time, the workspace is automatically connected to the emulator.
If the emulator was not connected but you want to connect it, refer to “4.5 Connecting the Emulator” (page 73).
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 72 of 228