R0E417250MCU00 Datasheet, PDF (70/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
4. Preparation for Debugging
Workspace Name:
Project Name:
Directory:
CPU family:
Toolchain:
Enter a workspace name here.
Enter a project name here. You do not need to enter any name if you wish this to be the
same as the workspace name.
Enter a directory in which you want a workspace to be created. Alternatively, click on the
Browse button and select a workspace directory from the dialog box.
Select the CPU family of the MCU you are using.
To use a toolchain, select the appropriate toolchain here. If you do not use any toolchain,
select None.
The other list boxes are used for setting up a toolchain. If no toolchains are installed, fixed information is displayed here. Click
on the OK button.
(3) Set the CPU and options for the toolchain and make other necessary settings.
(4) Select the target for debugging.
Figure 4.8 Setting the Target System for Debugging dialog box
Select the target platform you wish to use by placing a check mark in its checkbox and click on the Next button.
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 70 of 228