R0E417250MCU00 Datasheet, PDF (23/228 Pages) Renesas Technology Corp – E100 Emulator MCU Unit for H8SX/1700 Series

R0E417250MCU00 User’s Manual
2. Setup
14
Change the settings.
▼
15
Connect the user system.
▼
16
Turn on the power supply.
▼
17
Check the LEDs on the emulator.
▼
18
Start up the emulator debugger from the
High-performance Embedded Workshop.
▼
Set up the operating environment of the
19
emulator debugger.
▼
Debug a program with various functions of
20
the emulator debugger
Change the settings of the power supply to MCUs or clock supply,
according to the conditions on use.
Connect the user system as occasion demands.
Turn ON the power to the emulator and the user system as
simultaneously as possible.
Check that system status LEDs, and POWER and RESET of the
target status LED are lighting. When the user system is not
connected, the POWER LED does not light up.
Start up the High-performance Embedded Workshop to launch the
emulator debugger.
Check the contents set in step 12 in Figure 2.1. Do not select the
“Start booting up on successful completion of self-checking”
checkbox.
Refer to the High-performance Embedded Workshop and
“5. Debugging Functions” (page 77).
Figure 2.2 Flowchart of starting up the emulator (after self-checking)
REJ10J1831-0200 Rev.2.00 Jun.1, 2009
Page 23 of 228