CP3BT10 Datasheet, PDF (182/210 Pages) National Semiconductor (TI) – Reprogrammable Connectivity Processor with Bluetooth and USB Interfaces

27.0 Electrical Characteristics
27.1 ABSOLUTE MAXIMUM RATINGS
If Military/Aerospace specified devices are required, please
contact the National Semiconductor Sales Office/Distribu-
tors for availability and specifications.
Supply voltage (VCC)
All input and output voltages with re-
spect to GND*
3.6V
-0.5V to
IOVCC + 0.5V
ESD protection level
Allowable sink/source current per
signal pin
2 kV
(Human Body
Model)
±10 mA
Total current into IOVCC pins
Total current into VCC pins (source)
Total current out of GND pins (sink)
Latch-up immunity
Storage temperature range
200 mA
200 mA
200 mA
±200 mA
-65°C to +150°C
Note: Absolute maximum ratings indicate limits beyond
which damage to the device may occur. DC and AC electri-
cal specifications are not ensured when operating the de-
vice at absolute maximum ratings. *The latch-up tolerance
on ACCESS.bus pins exceeds 150 mA.
27.2 DC ELECTRICAL CHARACTERISTICS (Temperature: -40°C ≤ T_A ≤ +85°C)
Symbol
Parameter
Vcc
IOVcc
AVcc
UVcc
V_IL
V_IH
Vxl1
Vxh1
Vxl2
Vxh2
V_hys
I_OH
Digital Logic Supply Voltage
I/O Supply Voltage
Analog PLL Supply Voltage
USB Transceiver Power Supply
Logical 0 Input Voltage
(except X2CKI)
Logical 1 Input Voltage
(except X2CKI)
X1CKI Low Level Input Voltage
X1CKI High Level Input Voltage OSC
X2CKI Logical 0 Input Voltage
X2CKI Logical 1 Input Voltage
Hysteresis Loop Width ^a
Logical 1 Output Current
I_OL
Logical 0 Output Current
I_OLACB SDA, SCL Logical 0 Output Current
I_OHW
Weak Pull-up Current
I_IL
RESET pin Weak Pull-down Current
I_L
I_O(Off)
Icca1
High Impedance Input Leakage Current
Output Leakage Current
(I/O pins in input mode)
Digital Supply Current Active Mode ^b
Icca2 Digital Supply Current Active Mode ^c
Conditions
Min
2.25
2.25
2.25
2.97
-0.5 ^a
0.7 IOVcc
External X1 clock
External X1 clock
External X2 clock
External X2 clock
V_OH = 1.8V,
IOVcc = 2.25V
V_OL = 0.45V,
IOVcc = 2.25V
V_OL = 0.4V,
IOVcc = 2.25V
V_OH = 1.8V,
IOVcc =2.25V
V_IL = 0.45V,
IOVcc = 2.25V
0V ≤ Vin ≤ IOVcc
0V ≤ Vout ≤ Vcc
-0.5 ^a
0.7 Vcc
-0.5 ^a
0.7 Vcc
0.1 IOVcc
-1.6
1.6
3.0
-10
-2.0
-2.0
Vcc = 2.75V,
IOVcc = 3.63V
Vcc = 2.75V,
IOVcc = 3.63V
Max
2.75
3.63
2.75
3.63
0.3 Vcc
Units
V
V
V
V
V
IOVcc + 0.5 ^a V
0.3 Vcc
V
Vcc + 0.5
V
0.6
V
Vcc + 0.5
V
V
mA
mA
mA
µA
0.4
µA
2.0
µA
2.0
µA
12
mA
8
mA
www.national.com
182