MC68HC08JB1 Datasheet, PDF (206/216 Pages) Motorola, Inc – Microcontrollers

16.3 Absolute Maximum Ratings
Maximum ratings are the extreme limits to which the MCU can be
exposed without permanently damaging it.
NOTE:
This device is not guaranteed to operate properly at the maximum
ratings. Refer to 16.6 DC Electrical Characteristics for guaranteed
operating conditions.
NOTE:
Characteristic⁽¹⁾
Supply voltage
Symbol
Value
Unit
V_DD
–0.3 to +6.0
V
Input voltage
PTE4/D–, PTE3/D+
RST, IRQ
Others
Mode entry voltage, IRQ pin
Maximum current per pin
excluding V_DD and V_SS
Storage temperature
Maximum current of PTD0/1 pin
Maximum current out of V_SS
Maximum current into V_DD
V_IN
V_SS–1.0 to V_DD+0.3
V_SS–0.3 to V_DD+0.3
V
V_SS–0.3 to V_REG+0.3
V_DD + V_HI
V_SS–0.3 to +11
V
I
± 25
mA
T_STG
–55 to +150
°C
I_OL
–25 to +50
mA
I_MVSS
100
mA
I_MVDD
100
mA
NOTES:
1. Voltages referenced to V_SS
This device contains circuitry to protect the inputs against damage due
to high static voltages or electric fields; however, it is advised that normal
precautions be taken to avoid application of any voltage higher than
maximum-rated voltages to this high-impedance circuit. For proper
operation, it is recommended that V_IN and V_OUT be constrained to the
range V_SS ≤ (V_IN or V_OUT) ≤ V_REG. Reliability of operation is enhanced
if unused inputs are connected to an appropriate logic voltage level (for
example, either V_SS or V_REG).
Technical Data
206
MC68HC08JB1 — Rev. 2.1
Freescale Semiconductor