MC908AS60ACFU Datasheet, PDF (192/414 Pages) Freescale Semiconductor, Inc – M68HC08 Microcontrollers

Serial Communications Interface (SCI)
18.7 I/O Signals
Port E shares two of its pins with the SCI module. The two SCI I/O pins are:
• PTE0/SCTxD — Transmit data
• PTE1/SCRxD — Receive data
18.7.1 PTE0/SCTxD (Transmit Data)
The PTE0/SCTxD pin is the serial data output from the SCI transmitter. The SCI shares the PTE0/SCTxD
pin with port E. When the SCI is enabled, the PTE0/SCTxD pin is an output regardless of the state of the
DDRE2 bit in data direction register E (DDRE).
18.7.2 PTE1/SCRxD (Receive Data)
The PTE1/SCRxD pin is the serial data input to the SCI receiver. The SCI shares the PTE1/SCRxD pin
with port E. When the SCI is enabled, the PTE1/SCRxD pin is an input regardless of the state of the
DDRE1 bit in data direction register E (DDRE).
18.8 I/O Registers
The following I/O registers control and monitor SCI operation:
• SCI control register 1 (SCC1)
• SCI control register 2 (SCC2)
• SCI control register 3 (SCC3)
• SCI status register 1 (SCS1)
• SCI status register 2 (SCS2)
• SCI data register (SCDR)
• SCI baud rate register (SCBR)
18.8.1 SCI Control Register 1
SCI control register 1:
• Enables loop mode operation
• Enables the SCI
• Controls output polarity
• Controls character length
• Controls SCI wakeup method
• Controls idle character detection
• Enables parity function
• Controls parity type
MC68HC908AZ60A • MC68HC908AS60A • MC68HC908AS60E Data Sheet, Rev. 6
192
Freescale Semiconductor