|
XRT74L74 Datasheet, PDF (265/498 Pages) Exar Corporation – 4 CHANNEL, ATM UNI/PPP DS3/E3 FRAMING CONTROLLER | |||
|
◁ |
4 CHANNEL, ATM UNI/PPP DS3/E3 FRAMING CONTROLLER
ADVANCED CONFIDENTIAL
XRT74L74
REV. P1.1.1
FIGURE 91. FLOW DIAGRAM DEPICTING HOW THE RECEIVE FEAC PROCESSOR FUNCTIONS
SSTTAARRTT
11
EENNAABBLLEETTHHEEââFFEEAACCRREEMMOOVVAALLAANNDD
ââVVAALLIDIDAATTIOIONNââININTTEERRRRUUPPTTSS. .
TThhisisisisacaccocmomplpilsihshededbbyywwrirtiitninggâxâxxxxxxx11001100ââinintotoththee
âRâRxxDDSS33FFEEAACCInItnetrerrurputp/tS/StattautsusRRegegisitsetrer(A(Addddrersesss==00xx1177) )
RREECCEEIVIVEEFFEEAACCPPRROOCCEESSSSOORRBBEEGGININSSRREEAADDININGGININ
TTHHEEFFEEAACCBBITIT-F-FIEIELLDDSS(O(OFFININCCOOMMININGGDDSS33FFRRAAMMEESS) )
TTheheRReceecievieveFFEEAACCPProrcoecsessosrorchcehcekcsksfofrorthteheâFâFEEAACCFFrarmaminigng
AAlilgingmnmenentâtâppatattetrenrnoof fâ0â01111111111101â0.â.
IsIsththee
âFâFEEAACCFFrarmaminingg
AAlilgignmnmenentâtpâaptattetrenrn
NO
pprerseesnetntininthteheFFEEAACC NO
CChhanannenlel
??
YES
RREEAADDININTTHHEEââ66-B-BITITFFEEAACCCCOODDEEWWOORRDDââ
TThehe6-6b-bititFFEEAACCCCooddeeWWoordrdimimmmedeidaitaetleylyfoflollolwows sthteheâFâFEEAACC
FFrarmaminigngAAlilgingmnmenetnâtâPPatattetrenr.n.
HHasasthtihsis
sasmameeFFEEAACC
CCooddeeWWoordrdbbeeenen
YES
RReceecievievdedinin88ooututofofthtehelalsatst
1100FFEEAACCMMesessasgagee
RReceecpeptitoionns?s?
NO
GGEENNEERRAATTEEââFFEEAACC
VVAALLIDIDAATTIOIONNââININTTEERRRRUUPPTT
ININVVOOKKEEââFFEEAACCVVAALLIDIDAATTIOIONNââ
ININTTEERRRRUUPPTTSSEERRVVICICEERROOUUTTININEE. .
HHasasaaFFEEAACC
CCooddeeWWoordrd(o(othtehrerthtahnan
ththeelalsatstâVâValaildidataetdedCCooddeeWWoordrd) )
bbeeenenRReceecievievdedinin33oouut toof fththeelalsatst
1100FFEEAACCMMesessasgagee
RReceecpetpitoinosn?s?
11
YES
GGEENNEERRAATTEEââFFEEAACC
RREEMMOOVVAALLââININTTEERRRRUUPPTT
11
ININVVOOKKEEâFâFEEAACCRREEMMOOVVAALLââ
ININTTEERRRRUUPPTTSSEERRVVICICEERROOUUTTININEE. .
NOTES:
1. The white (e.g., unshaded) boxes reflect tasks that
the userâs system must perform in order to config-
ure the Receive FEAC Processor to receive FEAC
messages.
2. A brief description of the steps that must exist
within the FEAC Validation and FEAC Removal
Interrupt Service Routines exists in Section 5.3.3
5.3.3.2 The Message Oriented Signaling (e.g.,
LAP-D) Processing via the Receive DS3 HDLC
Controller block
The LAPD Receiver (within the Receive DS3 HDLC
Controller block) allows the user to receive PMDL
messages from the remote terminal equipment, via
the inbound DS3 frames. In this case, the inbound
message bits will be carried by the 3 DL bit-fields of
F-Frame 5, within each DS3 M-Frame. The remote
LAPD Transmitter will transmit a LAPD Message to
the Near-End Receiver via these three bits within
each DS3 Frame. The LAPD Receiver will receive
and store the information portion of the received
LAPD frame into the Receive LAPD Message Buffer,
which is located at addresses: 0xDE through 0x135
within the on-chip RAM. The LAPD Receiver has the
following responsibilities.
⢠Framing to the incoming LAPD Messages
⢠Filtering out stuffed 0s (within the information pay-
load)
⢠Storing the Frame Message into the Receive LAPD
Message Buffer
⢠Perform Frame Check Sequence (FCS) Verification
⢠Provide status indicators for
End of Message (EOM)
Flag Sequence Byte detected
Abort Sequence detected
Message Type
C/R Type
The occurrence of FCS Errors
263
|
▷ |