S6J3200 Datasheet, PDF (9/179 Pages) Cypress Semiconductor – 32-bit Microcontroller Traveo꽬 Family

S6J3200 Series
Table 2-2: Function Digit Table
Part Number
Function
Digit
CPU Clock
Maximum
Graphics
Clock
Maximum
Display Output
Support
Video Capture
Support
Graphic
Engine Type
HyperBus
Interface
Sound System
FPD-Link
Media System
Chip Select
Output of MFS
3
240MHz
200MHz
ch.0, 1
1 unit
2D
ch.0, 1
OFF
OFF
ON
ON
4
240MHz
200MHz
ch.0, 1
1 unit
2D
ch.0, 1
ON
OFF
ON
ON
5
240MHz
200MHz
ch.0, 1
1 unit
2D, 3D
ch.0, 1
OFF
OFF
ON
ON
S6J32X
(X = Function Digit)
6
7
8
A
240MHz 240MHz 240MHz 160MHz
200MHz 200MHz 200MHz 160MHz
ch.0, 1
1 unit
2D, 3D
ch.0, 1
ON
ON
ON
ON
ch.0, 1
1 unit
2D
ch.0, 1,
2
ON
OFF
ON
ON
ch.0, 1
1 unit
2D, 3D
ch.0, 1,
2
ON
ON
ON
ON
ch.0
OFF
2D
ch.0, 1
OFF
OFF
OFF
OFF
B
160MHz
160MHz
ch.0
OFF
2D
ch.0, 1
ON
OFF
OFF
OFF
C
160MHz
160MHz
ch.0
OFF
2D, 3D
ch.0, 1
OFF
OFF
OFF
OFF
D
160MHz
160MHz
ch.0
OFF
2D, 3D
ch.0, 1
ON
OFF
OFF
OFF
Notes:
− This table only shows the relations between the optional function and the part numbers. That is, all products are not
necessarily available for orders. See the order number on the datasheet, and confirm actual availabilities of products.
− The sound system is composed of the sound waveform generator, the sound mixer, the audio DAC, PCM-PWM, and I2S0.
− The media system means both Ethernet AVB and Media LB.
− HyperBus Interface ch.1 of the function digit 3, 4, 5, and 6 support HyperRAM after Revision B.
− Multi-function serial interface of the function digit 3, 4, 5, 6, 7, and 8 support SCL4, 10, 12 and SDA4, 10, 12 of I²C after
Revision D.
− The CLK_CPU is assigned for CPU clock. The CLK_CD3A0 is assigned for Graphic clock. They are defined at the chapter of
Clock Configuration.
− Display Output ch.0 is used for RSDS and FPD-LINK (LVDS) as well as DRGB (Digital RGB). The ch.0 of the product which
doesn’t support FPD-LINK is used for RSDS and DRGB.
− Display Output ch.1 is used for FPD-LINK (LVDS) and DRGB (Digital RGB). The ch.1 of the product which doesn't support
FPD-LINK is used for DRGB only.
Document Number: 002-05682 Rev.*A
Page 9 of 179