S6J3200 Datasheet, PDF (174/179 Pages) Cypress Semiconductor – 32-bit Microcontroller Traveo꽬 Family

S6J3200 Series
Summary
Error
Correct
ID
Delete Ethernet
restriction for
22
product
Improvement of
description for Pin 23
Assignment
Regarding "red"
character in Pin
Assignment
23-38
Note for Input
voltage and Max 76
clamp current
Direct Memory Access Interface, MAC
Filtering Block -VLAN tag, IEEE 1588 and
IEEE 802.1AS Support, MAC PFC Priority 21
Based Pause Frame Support, and
802.1Qav Support – Credit Based Shaping
Alphabets with pin numbers are signs
22
specify I/O circuit type.
The pins which are described in "red"
character are not supported, and will be
enhanced with next revision
products.
23-35
Maximum clamp current:*A (Remarks)
75
Total maximum clamp current:*A (Remarks)
(Delete)
#516
The characters next to the pin number in
the pin assignment drawing specify the
I/O circuit type.
(figure added)
#535
The pins which are described in "red"
character are not supported product with #524
revision A and C.
Maximum clamp current:*12, *A
(Remarks)
Total maximum clamp current:*12, *A
(Remarks)
#503
TYPO in Absolute
76
Maximum Rating
Input voltage:VI2:VCC5+0.3(Max)
,,,
Input voltage:VIE:VCC5+0.3(Max)
Input voltage:VI2:DVCC+0.3(Max)
75
,,,
Input voltage:VIE:VCC53+0.3(Max)
#518
Note for Input
voltage and Max 78
clamp current
Power supply
80
sequence
VIH/VIL
characteristics for 85, 86
I/O of DVCC
DS 8.3.1 Port
Function
86
Characteristics
-
77
Power supply sequence is recommended as
VCC5 -> [DVCC or AVCC5 or VCC3 or
79
AVCC3] -> VCC12 -> [AVCC3_LVDS_PLL
or VCC3_LVDS_TX]
-
VIL10(Max) 0.3xVcc5
84, 85
85
*12: VI or VO should never exceed the
specified ratings. However, if the
maximum current to/from an input is
#470
limited by a suitable external resistor, the
ICLAMP rating supersedes the VI rating.
Power supply sequence is recommended
as VCC5 -> [DVCC or AVCC5 or VCC3 or
AVCC3] -> VCC12 ->
[AVCC3_LVDS_PLL or
#474
VCC3_LVDS_TX].
Note that power supplies inside "[]" can be
turned on in arbitrary order.
(Added the "*1" for note of some
characteristics and the description)
#439
VIL10(Max) 0.3xVcc3
#453
VOH characteristic
87
for I/O of MediaLB
VOH16:VCC3-0.5(Min)
86
VOH16:2.0(Min)
#441
Document Number: 002-05682 Rev.*A
Page 174 of 179