English
Language : 

S6J3200 Datasheet, PDF (172/179 Pages) Cypress Semiconductor – 32-bit Microcontroller Traveo꽬 Family
S6J3200 Series
Summary
Error
Correct
ID
FSSCG0 232(480) 200(800) 160(640)
160(640)
FSSCG1 200(800) 200(800) 200(800)
Internal Clock
Timing for
FSSCG0-3 and
FPLL0-3
75, 76
FSSCG0 480 800(400) 640 640
FSSCG1 800(400) 800(400) 800(400)
800(400)
FSSCG2 800(400) 800(400) 800(400) 640
FSSCG3 800 800 800 800
FPLL0 720 800 800 640
FPLL1 800 800 800 640
FPLL2 800(400) 800(400) 800(400) 800
FPLL3 480 480 480 480
200(800)
FSSCG2 200(800) 200(800) 200(800)
160(640)
FSSCG3 200(800) 200(800) 200(800)
200(800)
FPLL0 240(720) 200(800) 200(800)
160(640)
FPLL1 400(800) 400(800) 400(800)
99, 100
320(640)
FPLL2 200(800) 200(800) 200(800)
#432
Notes:
,,,
− The frequency described in () is not
200(800)
FPLL3 240(480) 240(480) 240(480)
240(480)
maximum value but recommended
configuration value.
Notes:
,,,
− The frequency described in () is
maximum output frequency of SSCG PLL
/ PLL multiplier circuit.
VIH spec(TTL
level) for
65
VIH9: 2.0(Min)
85
VIH9: 2.3(Min)
#437
JTAG-pins
VIH of Media LB
65
port
VIH12: 1.7(V)
85
VIH12: 1.8(V)
#438
Original document code: DS708-00003-1v0-E, Previous document code: DS708-00003-0v04-E
Rev. 1.0 September 30, 2015
Resource clock
9
frequency
Resource clock frequency : 40MHz (Max) 8
Resource clock frequency : Option : See
#465
AC specification on the datasheet
Description for
10, 20 Up/Down Counter
up/down counter
Quad Position & Revolution
9, 19
Counter(Up/Down Counter)
#530
Display output 13
Notes:
,,,
- Display Output ch.0 is used for RSDS and
FPD-LINK (LVDS) as well as DRGB (Digital
RGB). The
12
ch.0 of the product which doesn’t support
FPD-LINK is used for RSDS and DRGB.
Display Output
ch.1 is used for DRGB only.
Notes:
,,,
- Display Output ch.0 is used for RSDS
and FPD-LINK (LVDS) as well as DRGB
(Digital RGB). The ch.0 of the product
which doesn’t support FPD-LINK is used
for RSDS and DRGB.
- Display Output ch.1 is used for
FPD-LINK (LVDS) and DRGB (Digital
RGB). The ch.1 of the product which
doesn't support FPD-LINK is used for
DRGB only.
#452
Document Number: 002-05682 Rev.*A
Page 172 of 179