S6J3200 Datasheet, PDF (164/179 Pages) Cypress Semiconductor – 32-bit Microcontroller Traveo꽬 Family

S6J3200 Series
Summary
Error
"Unused" clock
74
configuration
Notes:
,,,
,,,
Output short
circuit current
104 Output short circuit current IOS:
AC spec of
DDRHSSPI
[SDR mode]
toddata: 6.5ns (max)
tohdata: 3.5ns (min)
todsel: 5.5ns (max)
107,108 tohsel: 4.5ns (min)
[DDR mode]
toddata: 6.5ns (max)
todsel: 7.0ns (max)
SDR/DDR
Remark:tcyc -3.5nstcyc
107,108
(HSSPI) remark
-4.5nstcyc/2-1.5nstcyc -3.0ns
ADC trigger input 119 -
ADC resumption
119 -
time
Correct
ID
Notes:
,,,
,,,
- "Unused" means a clock source which
76
#229
doesn’t have any supply destinations.
Configure it as disable with performing at
the lower clock frequency than the
described maximum.
106 (Removed)
#203
[SDR mode]
toddata: tcyc/2 + 2ns (max)
tohdata: 2.0ns (min)
todsel: -12.0ns + (SS2CD+0.5)*tcyc ns
(min)
tohsel: 3.5ns (min)
109, [DDR mode]
110 toddata: tcyc/4 + 1.5ns (max)
#164
todsel: -15.75ns + (SS2CD+0.5)*tcyc ns
(min)
Notes:
− This is target spec.
− SS2CD [1:0] should be configured as
01, 10, or 11.
109,110 (Delete)
#232
A/D trigger input time:ADTRG
4tCLK_LCP1A ns (min) 4tCLK_LCP1A ≥
121
#231
100ns
100 ns (min) 4tCLK_LCP1A < 100ns
121 Resumption time: 1us(max)
#239
Document Number: 002-05682 Rev.*A
Page 164 of 179