S6J3200 Datasheet, PDF (173/179 Pages) Cypress Semiconductor – 32-bit Microcontroller Traveo꽬 Family

S6J3200 Series
Summary
Error
Correct
ID
Relationship
SYSC0_SYSIDR 14
and ChipID
Typo in trace
17
buffer size
WUCR function 20
CS port availability 20
Not support CS
20
input
Usage for I2S ch1 20
Imporvement of
descritption for 20
I2C
Reference for
DDR High Speed 20
SPI & CAN-FD
Reference
information for 21
GPO
Delete
unnecessary
description for 21
Graphic
subsystem
ID is specified for each function digit and
13
revision which is defined at Figure 2-1.
ID is specified for each function digit and
revision which is defined at Figure 2-1.
Chip ID can be read from
SYSC0_SYSIDR.
For SYSC0_SYSIDR, see the TraveoTM
Platform
hardware manual.
#471
4kB Embedded Trace Buffer
16
4k Word Embedded Trace Buffer
#528
MFS:
19
,,,
MFS:Chip select function of CSIO is not
supported yet and will be enhanced with 19
next revision.
MFS:
,,,
WUCR function is not supported for this
product.
MFS:The availability of chip select
function can be seen at Function Digit
Table.
#284
#448
-
19
Chip Select Input is not supported.
#467
− I2S0 only supports the output of sound
sources.
− I2S1 supports both the input and the
19
output.
− ,,,
Note all pins do not necessarily support I2C,
but the pins which have the dedicated I/O 19
characteristics only support it.
-
19, 20
GPO signal can only be used for "Internal
Control example by GPO" in this product,
that is, it can select
20
using HyperBus of PF or using HyperBus of
Graphic Sub System.
- I2S0 can output sound sources which
are processed by Sound System.
- I2S1 can input sound sources which are
processed by Sound System.
− ,,,
#529
See the "Sound System Configuration" of
S6J3200 hardware
manual in detail.
Note - Not all pins support I2C. Only pins
which have the I2C I/O characteristics #531
support it.
(Added "See the platform manual in
detail" for CAN-FD & DDR High Speed #532
SPI)
GPO signal can only be used for "Internal
Control example by GPO" in this product,
that is, it can select
using HyperBus of PF or using HyperBus #533
of Graphic Sub System. See the
"HyperBus Interface Port Configuration"
of S6J3200 hardware manual in detail.
Order replacement of RGB pins.
20
(Deleted)
#534
Document Number: 002-05682 Rev.*A
Page 173 of 179