GC5018_06 Datasheet, PDF (61/134 Pages) Texas Instruments – 8-CHANNEL WIDEBAND RECEIVER

www.ti.com
4.4.3.3 SSEL_DDC_CNTR Register
GC5018
8-CHANNEL WIDEBAND RECEIVER
SLWS169A – MAY 2005 – REVISED NOVEMBER 2005
Register name: SSEL_DDC_CNTR
BIT 15
rxinab_mux
rxincd_mux
0
0
unused
0
BIT 7
0
0
0
unused
0
Page: 0x1800
unused
0
Address: 0x02
ssel_ddc_counter(2:0)
0
0
BIT 8
0
ddc_counter_width(7:0)
0
0
0
BIT 0
0
0
rxinab_mux : When asserted, the rxin_a and rxin_b inputs are internally driven by the rxin_c and rxin_d
ports, respectively (Factory test use only).
rxincd_mux : When asserted, the rxin_c and rxin_d inputs are internally driven by the rxin_a and rxin_b
ports, respectively (Factory test use only).
ssel_ddc_counter(2:0) : Selects the sync source for the DDC sync counter.
ddc_counter_width(7:0) : Sets the width of the counter generated sync pulse in RX clock cycles, from 1
to 256.
Sync sources are contained in this and many of the following registers. For all sync source selections:
ssel_ddc_XXXXX(2:0)
000
001
010
011
100
101
110
111
Selected Sync Source
rxsyncA
rxsyncB
rxsyncC
rxsyncD
DDC sync counter
one shot (register write triggered)
always 0
always 1
GC5018 GENERAL CONTROL
61