LSM6DSL Datasheet, PDF (43/113 Pages) STMicroelectronics – iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope

LSM6DSL
7
Application hints
Application hints
7.1
LSM6DSL electrical connections in Mode 1
Figure 15. LSM6DSL electrical connections in Mode 1
*1'RU9'',2
6'26$
6'[
6&[
,17



 1& ^
723
1& ^
9,(:
,17
9GG


9''


&
Q)
*1'
&
9GGB,2
Q)
*1'
0RGH
+267
,^&63,Z
/60'6/
,^&FRQILJXUDWLRQ
9GGB,2
5_SX
5_SX
6&/
6'$
3XOOXSWREHDGGHG
5_SX N2KP
1. Leave pin electrically unconnected and soldered to PCB.
The device core is supplied through the Vdd line. Power supply decoupling capacitors (C1,
C2 = 100 nF ceramic) should be placed as near as possible to the supply pin of the device
(common design practice).
The functionality of the device and the measured acceleration/angular rate data is
selectable and accessible through the SPI/I²C interface.
The functions, the threshold and the timing of the two interrupt pins for each sensor can be
completely programmed by the user through the SPI/I²C interface.
DocID028475 Rev 5
43/113
113