HD64F36024FX Datasheet, PDF (9/386 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

4. When the E7 or E8 is used, address breaks can be set as either available to the user or for use
by the E7 or E8. If address breaks are set as being used by the E7 or E8, the address break
control registers must not be accessed.
5. When the E7 or E8 is used, NMI is an input/output pin (open-drain in output mode).
6. Use channel 1 of the SCI3 (P21/RXD, P22/TXD) in on-board programming mode by boot
mode.
Related Manuals:
The latest versions of all related manuals are available from our web site.
Please ensure you have the latest versions of all documents you require.
http://www.renesas.com/
H8/36024 Group and H8/36014 Group manuals:
Document Title
H8/36024 Group, H8/36014 Group Hardware Manual
H8/300H Series Software Manual
Document No.
This manual
REJ09B0213
User's manuals for development tools:
Document Title
H8S, H8/300 Series C/C++ Compiler, Assembler, Optimizing Linkage Editor
User's Manual
Microcomputer Development Environment System H8S, H8/300 Series
Simulator/Debugger User's Manual
H8S, H8/300 Series High-Performance Embedded Workshop 3, Tutorial
H8S, H8/300 Series High-Performance Embedded Workshop 3, User's
Manual
Document No.
REJ10B0058
ADE-702-282
REJ10B0024
REJ10B0026
Application notes:
Document Title
H8S, H8/300 Series C/C++ Compiler Package Application Note
Single Power Supply F-ZTAT^TM On-Board Programming
Document No.
REJ05B0464
ADE-502-055
Rev. 4.00 Sep. 23, 2005 Page vii of xxvi