HD64F36024FX Datasheet, PDF (106/386 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 7 ROM
7.1 Block Configuration
Figure 7.1 shows the block configuration of 32-kbyte flash memory. The thick lines indicate
erasing units, the narrow lines indicate programming units, and the values are addresses. The flash
memory is divided into 1 kbyte × 4 blocks and 28 kbytes × 1 block. Erasing is performed in these
units. Programming is performed in 128-byte units starting from an address with lower eight bits
H'00 or H'80.
Erase unit
1kbyte
H'0000
H'0080
H'0001
H'0081
H'0002
H'0082
Erase unit
1kbyte
H'0380
H'0400
H'0480
H'0381
H'0401
H'0481
H'0382
H'0402
H'0481
Erase unit
1kbyte
H'0780
H'0800
H'0880
H'0781
H'0801
H'0881
H'0782
H'0802
H'0882
Erase unit
1kbyte
H'0B80
H'0C00
H'0C80
H'0B81
H'0C01
H'0C81
H'0B82
H'0C02
H'0C82
Erase unit
28 kbytes
H'0F80
H'1000
H'1080
H'0F81
H'1001
H'1081
H'0F82
H'1002
H'1082
Programming unit: 128 bytes
Programming unit: 128 bytes
Programming unit: 128 bytes
Programming unit: 128 bytes
Programming unit: 128 bytes
H'007F
H'00FF
H'03FF
H'047F
H'04FF
H'07FF
H'087F
H'08FF
H'0BFF
H'0C7F
H'0CFF
H'0FFF
H'107F
H'10FF
H'7F80
H'7F81
H'7F82
Figure 7.1 Flash Memory Block Configuration
H'7FFF
Rev. 4.00 Sep. 23, 2005 Page 78 of 354
REJ09B0025-0400