English
Language : 

MC68HC908GP32 Datasheet, PDF (405/410 Pages) Motorola, Inc – M68HC08 Family of 8-bit microcontroller units (MCUs)
◁
Freescale Semiconductor, Inc.
MC68HC08GP32
A.8 Electrical Specifications
Electrical specifications for the MC68HC908GP32 apply to the
MC68HC08GP32, except for the parameters indicated below.
A.8.1 Functional Operating Range
Characteristic
Operating temperature range
Operating voltage range
Symbol
TA
VDD
C
– 40 to +85
3V ± 10%
5V ± 10%
Value
Unit
V
M
°C
– 40 to +105 – 40 to +125
3V ± 10%
5V ± 10%
—
5V ± 10%
V
A.8.2 5.0-V DC Electrical Characteristics
Characteristic(1)
Symbol
Min
Typ(2)
Max
Unit
VDD supply current
Run(3)
Wait(4)
Stop(5)
25 °C
25 °C with TBM enabled(6)
IDD
25 °C with LVI and TBM enabled(6)
–40 °C to 125 °C
–40 °C to 85 °C with TBM enabled(6)
–40 °C to 85 °C with LVI and TBM enabled(6)
—
15
20
mA
—
4
8
mA
—
2
—
µA
—
20
—
µA
—
300
—
µA
—
—
35
µA
—
50
—
µA
—
500
—
µA
Low-voltage inhibit, trip falling voltage
Low-voltage inhibit, trip rising voltage
Low-voltage inhibit reset/recover hysteresis
(VTRIPF + VHYS = VTRIPR)
Notes:
VTRIPF
3.90
4.25
4.50
V
VTRIPR
4.00
4.35
4.60
V
VHYS
—
100
—
mV
1. VDD = 5.0 Vdc ± 10%, VSS = 0 Vdc, TA = TL to TH, unless otherwise noted
2. Typical values reflect average measurements at midpoint of voltage range, 25 °C only.
3. Run (operating) IDD measured using external square wave clock source (fOSC = 32.8 MHz). All inputs 0.2V from rail. No
dc loads. Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance linearly
affects run IDD. Measured with all modules enabled.
4. Wait IDD measured using external square wave clock source (fOSC = 32.8 MHz). All inputs 0.2 V from rail. No dc loads.
Less than 100 pF on all outputs. CL = 20 pF on OSC2. All ports configured as inputs. OSC2 capacitance linearly affects
wait IDD. Measured with PLL and LVI enabled.
5. Stop IDD is measured with OSC1 = VSS.
6. Stop IDD with TBM enabled is measured using an external square wave clock source (fOSC = 32.8 MHz). All inputs 0.2V
from rail. No dc loads. Less than 100 pF on all outputs. All inputs configured as inputs.
MC68HC908GP32•MC68HC08GP32 — Rev. 6
MOTOROLA
MC68HC08GP32
For More Information On This Product,
Go to: www.freescale.com
Technical Data
403
 ▷