MC68HC908GP32 Datasheet, PDF (280/410 Pages) Motorola, Inc – M68HC08 Family of 8-bit microcontroller units (MCUs)

Freescale Semiconductor, Inc.
System Integration Module (SIM)
19.7.1 Wait Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
19.7.2 Stop Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
19.8 SIM Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
19.8.1 SIM Break Status Register . . . . . . . . . . . . . . . . . . . . . . . . . 298
19.8.2 SIM Reset Status Register . . . . . . . . . . . . . . . . . . . . . . . . 300
19.8.3 SIM Break Flag Control Register . . . . . . . . . . . . . . . . . . . . 301
19.2 Introduction
This section describes the system integration module (SIM). Together
with the CPU, the SIM controls all MCU activities. A block diagram of the
SIM is shown in Figure 19-1. Table 19-1 is a summary of the SIM
input/output (I/O) registers. The SIM is a system state controller that
coordinates CPU and exception timing. The SIM is responsible for:
• Bus clock generation and control for CPU and peripherals:
– Stop/wait/reset/break entry and recovery
– Internal clock control
• Master reset control, including power-on reset (POR) and COP
timeout
• Interrupt control:
– Acknowledge timing
– Arbitration control timing
– Vector address generation
• CPU enable/disable timing
• Modular architecture expandable to 128 interrupt sources
Table 19-1 shows the internal signal names used in this section.
Technical Data
278
MC68HC908GP32•MC68HC08GP32 — Rev. 6
System Integration Module (SIM)
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA