MC68HC908GP32 Datasheet, PDF (230/410 Pages) Motorola, Inc – M68HC08 Family of 8-bit microcontroller units (MCUs)

Freescale Semiconductor, Inc.
Input/Output (I/O) Ports
16.6.2 Data Direction Register D
Data direction register D (DDRD) determines whether each port D pin is
an input or an output. Writing a logic 1 to a DDRD bit enables the output
buffer for the corresponding port D pin; a logic 0 disables the output
buffer.
Address: $0007
Bit 7
6
5
4
3
2
1
Read:
DDRD7 DDRD6 DDRD5 DDRD4 DDRD3 DDRD2 DDRD1
Write:
Reset: 0
0
0
0
0
0
0
Figure 16-14. Data Direction Register D (DDRD)
Bit 0
DDRD0
0
DDRD7–DDRD0 — Data Direction Register D Bits
These read/write bits control port D data direction. Reset clears
DDRD7–DDRD0, configuring all port D pins as inputs.
1 = Corresponding port D pin configured as output
0 = Corresponding port D pin configured as input
NOTE: Avoid glitches on port D pins by writing to the port D data register before
changing data direction register D bits from 0 to 1.
Figure 16-15 shows the port D I/O logic.
NOTE:
For those devices packaged in a 40-pin dual in-line package, PTD6 and
PTD7 are not connected. DDRD6 and DDRD7 should be set to a 1 to
configure PTD6 and PTD7 as outputs.
Technical Data
228
MC68HC908GP32•MC68HC08GP32 — Rev. 6
Input/Output (I/O) Ports
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA