MC68HC908GP32 Datasheet, PDF (114/410 Pages) Motorola, Inc – M68HC08 Family of 8-bit microcontroller units (MCUs)

Freescale Semiconductor, Inc.
Clock Generator Module (CGMC)
The following conditions apply when the PLL is in automatic bandwidth
control mode:
• The ACQ bit (See 7.6.2 PLL Bandwidth Control Register.) is a
read-only indicator of the mode of the filter. (See 7.4.4
Acquisition and Tracking Modes.)
• The ACQ bit is set when the VCO frequency is within a certain
tolerance and is cleared when the VCO frequency is out of a
certain tolerance. (See 7.9 Acquisition/Lock Time
Specifications for more information.)
• The LOCK bit is a read-only indicator of the locked state of the
PLL.
• The LOCK bit is set when the VCO frequency is within a certain
tolerance and is cleared when the VCO frequency is out of a
certain tolerance. (See 7.9 Acquisition/Lock Time
Specifications for more information.)
• CPU interrupts can occur if enabled (PLLIE = 1) when the PLL’s
lock condition changes, toggling the LOCK bit. (See 7.6.1 PLL
Control Register.)
The PLL also may operate in manual mode (AUTO = 0). Manual mode
is used by systems that do not require an indicator of the lock condition
for proper operation. Such systems typically operate well below
f_BUSMAX.
Technical Data
112
MC68HC908GP32•MC68HC08GP32 — Rev. 6
Clock Generator Module (CGMC)
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA