PIC18FXX39 Datasheet, PDF (92/322 Pages) Microchip Technology – Enhanced FLASH Microcontrollers with Single Phase Induction Motor Control Kernel

PIC18FXX39
TABLE 9-7: PORTD FUNCTIONS
Name
Bit#
Buffer Type
Function
RD0/PSP0 bit0
RD1/PSP1 bit1
RD2/PSP2 bit2
RD3/PSP3 bit3
RD4/PSP4 bit4
RD5/PSP5 bit5
RD6/PSP6 bit6
RD7/PSP7 bit7
ST/TTL⁽¹⁾
ST/TTL⁽¹⁾
ST/TTL⁽¹⁾
ST/TTL⁽¹⁾
ST/TTL⁽¹⁾
ST/TTL⁽¹⁾
ST/TTL⁽¹⁾
ST/TTL⁽¹⁾
Input/output port pin or parallel slave port bit0.
Input/output port pin or parallel slave port bit1.
Input/output port pin or parallel slave port bit2.
Input/output port pin or parallel slave port bit3.
Input/output port pin or parallel slave port bit4.
Input/output port pin or parallel slave port bit5.
Input/output port pin or parallel slave port bit6.
Input/output port pin or parallel slave port bit7.
Legend: ST = Schmitt Trigger input, TTL = TTL input
Note 1: Input buffers are Schmitt Triggers when in I/O mode and TTL buffers when in Parallel Slave Port mode.
TABLE 9-8: SUMMARY OF REGISTERS ASSOCIATED WITH PORTD
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on
POR, BOR
PORTD
RD7
RD6
RD5
RD4
RD3
RD2
RD1
RD0 xxxx xxxx
LATD
LATD Data Output Register
xxxx xxxx
TRISD PORTD Data Direction Register
1111 1111
TRISE
IBF
OBF IBOV PSPMODE — PORTE Data Direction bits
0000 -111
Legend: x = unknown, u = unchanged, - = unimplemented, read as '0'. Shaded cells are not used by PORTD.
Value on
All Other
RESETS
uuuu uuuu
uuuu uuuu
1111 1111
0000 -111
DS30485B-page 92
Preliminary
 2002-2013 Microchip Technology Inc.