PIC18FXX39 Datasheet, PDF (249/322 Pages) Microchip Technology – Enhanced FLASH Microcontrollers with Single Phase Induction Motor Control Kernel

PIC18FXX39
TBLRD
Table Read
Syntax:
[ label ] TBLRD ( *; *+; *-; +*)
Operands: None
Operation:
if TBLRD *,
(Prog Mem (TBLPTR))  TABLAT;
TBLPTR - No Change;
if TBLRD *+,
(Prog Mem (TBLPTR))  TABLAT;
(TBLPTR) +1  TBLPTR;
if TBLRD *-,
(Prog Mem (TBLPTR))  TABLAT;
(TBLPTR) -1  TBLPTR;
if TBLRD +*,
(TBLPTR) +1  TBLPTR;
(Prog Mem (TBLPTR))  TABLAT;
Status Affected:None
Encoding:
0000
0000
0000
10nn
nn=0 *
=1 *+
=2 *-
=3 +*
Description:
This instruction is used to read the con-
tents of Program Memory (P.M.). To
address the program memory, a pointer
called Table Pointer (TBLPTR) is used.
The TBLPTR (a 21-bit pointer) points
to each byte in the program memory.
TBLPTR has a 2 Mbyte address range.
TBLPTR[0] = 0: Least Significant
Byte of Program
Memory Word
TBLPTR[0] = 1: Most Significant
Byte of Program
Memory Word
The TBLRD instruction can modify the
value of TBLPTR as follows:
• no change
• post-increment
• post-decrement
• pre-increment
Words:
1
Cycles:
2
Q Cycle Activity:
Q1
Q2
Decode
No
operation
No
No operation
operation (Read Program
Memory)
Q3
No
operation
No
operation
Q4
No
operation
No operation
(Write TABLAT)
TBLRD
Table Read (cont’d)
Example1:
TBLRD *+ ;
Before Instruction
TABLAT
=
TBLPTR
=
MEMORY(0x00A356) =
After Instruction
TABLAT
=
TBLPTR
=
Example2:
TBLRD +* ;
Before Instruction
TABLAT
=
TBLPTR
=
MEMORY(0x01A357) =
MEMORY(0x01A358) =
After Instruction
TABLAT
=
TBLPTR
=
0x55
0x00A356
0x34
0x34
0x00A357
0xAA
0x01A357
0x12
0x34
0x34
0x01A358
 2002-2013 Microchip Technology Inc.
Preliminary
DS30485B-page 249