MRF24XA_15 Datasheet, PDF (76/258 Pages) Microchip Technology – Low-Power, 2.4 GHz ISM-Band IEEE 802.15.4™ RF

MRF24XA
REGISTER 3-7: PIE4 (PERIPHERAL INTERRUPT ENABLE 4)
R/W-0
R/W-0
R/W-1
R/W-1
R/W-1
R/W-0
TXSFDIE RXSFDIE ERRORIE WARNIE EDCCAIE GPIO2IE
bit 7
ADDRESS: 0x0B
R/W-0
R/W-0
GPIO1IE
GPIO0IE
bit 0
Legend: R = Readable bit W = Writable bit
-n = Value at POR
‘1’ = Bit is set
r = Reserved
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7
TXSFDIE: Transmit SFD Sent Interrupt Enable bit
This bit masks the TXSFDIF interrupt register.
bit 6
RXSFDIE: Receive SFD Detected Interrupt Enable bit
This bit masks the RXSFDIF Interrupt Enable.
bit 5
ERRORIE: General Error Interrupt Enable bit
This bit masks the ERRORIF interrupt register.
bit 4
WARNIE: Warning Interrupt Enable bit
This bit masks the WARNIF interrupt register.
bit 3
EDCCAIE: Energy Detect/CCA Done Interrupt Enable bit
This bit masks the EDCCAIF interrupt register.
bit 2
GPIO2IE: GPIO2 Interrupt Enable bit
This bit masks the GPIO2IF interrupt register.
bit 1
GPIO1IE: GPIO1 Interrupt Enable bit
This bit masks the GPIO1IF interrupt register.
bit 0
GPIO0IE: GPIO0 Interrupt Enable bit
This bit masks the GPIO0IF interrupt register.
DS70005023C-page 76
Preliminary
 2015 Microchip Technology Inc.