English
Language : 

PIC24FJ16MC101_12 Datasheet, PDF (336/350 Pages) Microchip Technology – 16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM)
PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
TABLE A-1: MAJOR SECTION UPDATES (CONTINUED)
Section Name
Update Description
Section 23.0 “Special Features”
Updated bits 5 and 4 of FPOR, modified Note 2, and removed Note 3
from the Configuration Shadow Register Map (see Table 23-1).
Updated bit 14 of CONFIG1 and removed Note 4 from the Configuration
Flash Words (see Table 23-2).
Updated the PLLKEN Configuration bit description (see Table 23-3).
Added Note 3 to Connections for the On-Chip Voltage Regulator (see
Figure 23-1).
Section 26.0 “Electrical Characteristics” Updated the Standard Operating Conditions to: 3.0V to 3.6V in all
tables.
Removed the Voltage on VCAP with respect to VSS entry in Absolute
Maximum Ratings(1).
Updated the VDD Range (in Volts) in Operating MIPS vs. Voltage (see
Table 26-1).
Removed parameter DC18 and updated the minimum value for
parameter DC 10 in the DC Temperature and Voltage Specifications
(see Table 26-4).
Updated the Characteristic definition and the Typical value for
parameter BO10 in Electrical Characteristics: BOR (see Table 26-5).
Updated Note 2 in the DC Characteristics: Operating Current (IDD) (see
Table 26-6).
Updated Note 2 in the DC Characteristics: Idle Current (IIDLE) (see
Table 26-7).
Updated Note 2 and parameters DC60C and DC61a-DC61d in the DC
Characteristics: Power-Down Current (IPD) (see Table 26-8).
Updated Note 2 in the DC Characteristics: Doze Current (IDOZE) (see
Table 26-9).
Added Note 1 to the Internal Voltage Regulator Specifications (see
Table 26-13).
Updated the Minimum and Maximum values for parameter F20a and the
Typical value for parameter F20b in AC Characteristics: Internal Fast
RC (FRC) Accuracy (see Table 26-18).
Updated the Minimum, Typical, and Maximum values for parameters
F21a and F21b in Internal Low-Power RC (LPRC) Accuracy (see
Table 26-19).
Updated the Minimum, Typical, and Maximum values for parameter
D305 in the Comparator Module Specifications (see Table 26-43).
Added parameters CTMUFV1 and CTMUFV2 and updated Note 1 and
the Conditions for all parameters in the CTMU Current Source
Specifications (see Table 26-46).
Added Forward Voltage Versus Temperature (see Figure 26-25).
DS39997C-page 336
Preliminary
© 2011-2012 Microchip Technology Inc.