PIC24FJ16MC101_12 Datasheet, PDF (260/350 Pages) Microchip Technology – 16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM)

PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
TABLE 26-7: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
Standard Operating Conditions: 3.0V to 3.6V
DC CHARACTERISTICS
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Idle Current (IIDLE): Core OFF Clock ON Base Current⁽²⁾ – PIC24FJ16MC101/102 Devices
DC40d
0.6
1.6
mA
-40°C
DC40a
DC40b
0.6
1.6
mA
0.9
1.6
mA
+25°C
+85°C
3.3V
LPRC (31 kHz)⁽³⁾
DC40c
1.2
1.6
mA
+125°C
DC41d
0.5
1.1
mA
-40°C
DC41a
DC41b
0.5
1.1
mA
0.5
1.1
mA
+25°C
+85°C
3.3V
1 MIPS⁽³⁾
DC41c
0.8
1.1
mA
+125°C
DC42d
0.9
1.6
mA
-40°C
DC42a
DC42b
0.9
1.6
mA
1.0
1.6
mA
+25°C
+85°C
3.3V
4 MIPS⁽³⁾
DC42c
1.2
1.6
mA
+125°C
DC43a
1.6
2.6
mA
+25°C
DC43d
DC43b
1.6
2.6
mA
1.7
2.6
mA
-40°C
+85°C
3.3V
10 MIPS⁽³⁾
DC43c
2
2.6
mA
+125°C
DC44d
2.4
3.8
mA
-40°C
DC44a
DC44b
2.4
3.8
mA
2.6
3.8
mA
+25°C
+85°C
3.3V
16 MIPS⁽³⁾
DC44c
2.9
3.8
mA
+125°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated.
2: Base Idle current is measured as follows:
• CPU core is off, oscillator is configured in EC mode, OSC1 is driven with external square wave from
rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration word
• External Secondary Oscillator (SOSC) is disabled (i.e., SOSCO and SOSCI pins are configured as
digital I/O inputs)
• All I/O pins are configured as inputs and pulled to VSS
• MCLR = VDD, WDT and FSCM are disabled
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are all
zeroed)
• The VREGS bit (RCON<8>) = 1
3: These parameters are characterized, but not tested in manufacturing.
DS39997C-page 260
Preliminary
© 2011-2012 Microchip Technology Inc.