PIC24FJ16MC101_12 Datasheet, PDF (257/350 Pages) Microchip Technology – 16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM)

PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
TABLE 26-4: DC TEMPERATURE AND VOLTAGE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic
Min
Typ⁽¹⁾ Max Units
Conditions
Operating Voltage
DC10 VDD
Supply Voltage⁽³⁾
3.0
DC12 VDR
RAM Data Retention Voltage⁽²⁾ 1.8
—
3.6
V Industrial and Extended
—
—
V
—
DC16 VPOR VDD Start Voltage
—
—
VSS
V
—
to ensure internal
Power-on Reset signal
DC17 SVDD
VDD Rise Rate
to ensure internal
Power-on Reset signal
0.024
—
— V/ms 0-2.4V in 0.1s
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: This is the limit to which VDD may be lowered without losing RAM data.
3: Overall functional device operation at VBOR < VDD < VDDMIN is guaranteed but not characterized. All device
analog modules such as the ADC, etc., will function but with degraded performance below VDDMIN.
TABLE 26-5: ELECTRICAL CHARACTERISTICS: BOR
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic
Min⁽¹⁾ Typ Max Units
Conditions
BO10
Note 1:
2:
VBOR
BOR Event on VDD transition
high-to-low
2.40 2.48 2.55
V ^{See Note 2}
Parameters are for design guidance only and are not tested in manufacturing.
Overall functional device operation at VBOR < VDD < VDDMIN is guaranteed but not characterized. All
device analog modules such as the ADC, etc., will function but with degraded performance below VDDMIN.
© 2011-2012 Microchip Technology Inc.
Preliminary
DS39997C-page 257