PIC24FJ16MC101_12 Datasheet, PDF (259/350 Pages) Microchip Technology – 16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM)

PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
TABLE 26-6: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
Standard Operating Conditions: 3.0V to 3.6V
DC CHARACTERISTICS
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Operating Current (IDD)⁽²⁾ – PIC24FJ32MC101/102/104 Devices
DC20d
1.7
—
mA
-40°C
DC20a
DC20b
1.7
—
mA
1.7
—
mA
+25°C
+85°C
3.3V
LPRC (31 kHz)⁽³⁾
DC20c
1.7
—
mA
+125°C
DC21d
2.6
—
mA
-40°C
DC21a
DC21b
2.6
—
mA
2.6
—
mA
+25°C
+85°C
3.3V
1 MIPS⁽³⁾
DC21c
2.6
—
mA
+125°C
DC22d
8.5
—
mA
-40°C
DC22a
DC22b
8.5
—
mA
8.5
—
mA
+25°C
+85°C
3.3V
4 MIPS⁽³⁾
DC22c
8.5
—
mA
+125°C
DC23d
16
—
mA
-40°C
DC23a
DC23b
16
—
mA
16
—
mA
+25°C
+85°C
3.3V
10 MIPS⁽³⁾
DC23c
16
—
mA
+125°C
DC24d
21
—
mA
-40°C
DC24a
DC24b
21
—
mA
21
—
mA
+25°C
+85°C
3.3V
16 MIPS
DC24c
21
—
mA
+125°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated.
2: IDD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDD measurements are as follows:
• Oscillator is configured in EC mode, OSC1 is driven with external square wave from rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to VSS
• MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are all
zeroed)
• CPU executing while(1) statement
3: These parameters are characterized, but not tested in manufacturing.
© 2011-2012 Microchip Technology Inc.
Preliminary
DS39997C-page 259