English
Language : 

PIC24FJ16MC101_12 Datasheet, PDF (279/350 Pages) Microchip Technology – 16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM)
PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
FIGURE 26-12:
SCKx
(CKP = 0)
SCKx
(CKP = 1)
SPIx MASTER MODE (HALF-DUPLEX, TRANSMIT ONLY CKE = 1) TIMING
CHARACTERISTICS FOR PIC24FJ16MC101/102
SP36
SP10
SP21
SP20
SP35
SP20
SP21
SDOx
MSb
Bit 14 - - - - - -1
LSb
SP30, SP31
Note: Refer to Figure 26-1 for load conditions.
TABLE 26-30: SPIx MASTER MODE (HALF-DUPLEX, TRANSMIT ONLY) TIMING REQUIREMENTS
FOR PIC24FJ16MC101/102
AC CHARACTERISTICS
Standard Operating Conditions: 2.4V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic(1)
Min Typ(2) Max Units
Conditions
SP10 TscP
Maximum SCK Frequency
—
—
15 MHz See Note 3
SP20 TscF
SCKx Output Fall Time
—
—
—
ns See parameter DO32
and Note 4
SP21 TscR
SCKx Output Rise Time
—
—
—
ns See parameter DO31
and Note 4
SP30 TdoF
SDOx Data Output Fall Time
—
—
—
ns See parameter DO32
and Note 4
SP31 TdoR
SDOx Data Output Rise Time
—
—
—
ns See parameter DO31
and Note 4
SP35 TscH2doV, SDOx Data Output Valid after
—
6
20
ns
—
TscL2doV SCKx Edge
SP36 TdiV2scH, SDOx Data Output Setup to
30
—
—
ns
—
TdiV2scL First SCKx Edge
Note 1:
2:
3:
4:
These parameters are characterized, but are not tested in manufacturing.
Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
The minimum clock period for SCKx is 66.7 ns. Therefore, the clock generated in Master mode must not
violate this specification.
Assumes 50 pF load on all SPIx pins.
© 2011-2012 Microchip Technology Inc.
Preliminary
DS39997C-page 279