PIC24FJ16MC101_12 Datasheet, PDF (255/350 Pages) Microchip Technology – 16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM)

PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
26.0 ELECTRICAL CHARACTERISTICS
Note: It is important to note that the specifications in this chapter of the data sheet, supercede any specifications
that may be provided in PIC24F Family Reference Manual sections.
This section provides an overview of PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 electrical characteristics.
Additional information will be provided in future revisions of this document as it becomes available.
Absolute maximum ratings for the PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 family are listed below.
Exposure to these maximum rating conditions for extended periods may affect device reliability. Functional operation of
the device at these or any other conditions above the parameters indicated in the operation listings of this specification
is not implied.
Absolute Maximum Ratings⁽¹⁾
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V
Voltage on any pin that is not 5V tolerant with respect to VSS⁽³⁾ .................................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to VSS when VDD ≥ 3.0V⁽³⁾ .................................................. -0.3V to +5.6V
Voltage on any 5V tolerant pin with respect to VSS when VDD < 3.0V⁽³⁾ .................................................... -0.3V to 3.6V
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into VDD pin⁽²⁾...........................................................................................................................250 mA
Maximum output current sourced and sunk by any I/O pin excluding OSCO .........................................................15 mA
Maximum output current sourced and sunk by OSCO............................................................................................25 mA
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports⁽²⁾...............................................................................................................200 mA
Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods may affect device reliability.
2: Maximum allowable current is a function of device maximum power dissipation (see Table 26-2).
3: See the “Pin Diagrams” section for 5V tolerant pins.
© 2011-2012 Microchip Technology Inc.
Preliminary
DS39997C-page 255