PIC24FJ16MC101_12 Datasheet, PDF (306/350 Pages) Microchip Technology – 16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM)

PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
TABLE 26-47: ADC MODULE SPECIFICATIONS
AC CHARACTERISTICS
Standard Operating Conditions (see Note 6): 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic
Min.
Typ
Max. Units
Conditions
Device Supply
AD01 AVDD Module VDD Supply^(2,4) Greater of — Lesser of V
VDD – 0.3
VDD + 0.3
—
or 2.9
or 3.6
AD02 AVSS Module VSS Supply^(2,5) VSS – 0.3 — VSS + 0.3 V
—
AD09 IAD
Operating Current
—
7.0
9.0
mA See Note 1
Analog Input
AD12 VINH
Input Voltage Range
VINH⁽²⁾
VINL
—
AVDD
V This voltage reflects Sample
and Hold Channels 0, 1, 2,
and 3 (CH0-CH3), positive
input
AD13 VINL
Input Voltage Range
VINL⁽²⁾
AVSS
— AVSS + 1V V This voltage reflects Sample
and Hold Channels 0, 1, 2,
and 3 (CH0-CH3), negative
input
AD17 RIN
Recommended Imped-
—
—
200
Ω
—
ance of Analog Voltage
Source⁽³⁾
Note 1: These parameters are not characterized or tested in manufacturing.
2: These parameters are characterized, but are not tested in manufacturing.
3: These parameters are assured by design, but are not characterized or tested in manufacturing.
4: This pin may not be available on all devices, in which case, this pin will be connected to VDD internally.
See the “Pin Diagrams” section for availability.
5: This pin may not be available on all devices, in which case, this pin will be connected to VSS internally. See
the “Pin Diagrams” section for availability.
6: Overall functional device operation at VBOR < VDD < VDDMIN is guaranteed but not characterized. All
device analog modules such as the ADC, etc., will function but with degraded performance below VDDMIN.
DS39997C-page 306
Preliminary
© 2011-2012 Microchip Technology Inc.