|
PIC24FJ16MC101_12 Datasheet, PDF (262/350 Pages) Microchip Technology – 16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM) | |||
|
◁ |
PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
TABLE 26-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ⤠TA ⤠+85°C for Industrial
-40°C ⤠TA ⤠+125°C for Extended
Parameter
No.
Typical(1)
Max
Units
Conditions
Power-Down Current (IPD)(2) â PIC24FJ16MC1001/102 Devices
DC60d
27
250
µA
-40°C
DC60a
DC60b
32
250
µA
+25°C
3.3V Base Power-Down Current(3,4)
43
250
µA
+85°C
DC60c
150
500
µA
+125°C
DC61d
420
600
µA
-40°C
DC61a
DC61b
420
600
530
750
µA
+25°C
3.3V Watchdog Timer Current: ÎIWDT(3,5)
µA
+85°C
DC61c
620
900
µA
+125°C
Power-Down Current (IPD)(2) â PIC24FJ32MC101/102/104 Devices
DC60d
250
â
µA
-40°C
DC60a
DC60b
250
â
250
â
µA
+25°C
3.3V Base Power-Down Current(3,4)
µA
+85°C
DC60c
500
â
µA
+125°C
DC61d
600
â
µA
-40°C
DC61a
DC61b
600
â
750
â
µA
+25°C
3.3V Watchdog Timer Current: ÎIWDT(3,5)
µA
+85°C
DC61c
900
â
µA
+125°C
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated.
2: IPD (Sleep) current is measured as follows:
⢠CPU core is off, oscillator is configured in EC mode, OSC1 is driven with external square wave from
rail-to-rail
⢠CLKO is configured as an I/O input pin in the Configuration word
⢠External Secondary Oscillator (SOSC) is disabled (i.e., SOSCO and SOSCI pins are configured as
digital I/O inputs)
⢠All I/O pins are configured as inputs and pulled to VSS
⢠MCLR = VDD, WDT and FSCM are disabled
⢠All peripheral modules are disabled (PMDx bits are all ones)
⢠VREGS bit (RCON<8>) = 1 (i.e., core regulator is set to stand-by while the device is in Sleep mode)
⢠On applicable devices, RTCC is disabled plus the VREGS bit (RCON<8>) = 1
3: The Î current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
4: These currents are measured on the device containing the most memory in this family.
5: These parameters are characterized, but not tested in manufacturing.
DS39997C-page 262
Preliminary
© 2011-2012 Microchip Technology Inc.
|
▷ |